Fittings, Fastenings and Accessories

100mm galvanised timber baton screws are used for fixing timber to timber including both softwoods and hardwoods. Timber batten screws have a hexagonal slot at the top where a special hexagonal drill fitting fits into to drive the screws into the timber. They have a co...

45mm Galvanised Screws are a self drilling timber screw designed for fixing materials to timber. These screws have a crossed slot called a phillips head at the top where a phillips head drill fitting, or a phillips head fits into to drive the screws into the timber. The...

4mm Stainless Steel cable is a product that is mainly used for Deck or Handrail Balustrading. It is easy to use with the correct tools and is usually used in conjunction with eyelets and turnbuckles for attachment and tightening. It can also be used when erecting Shade ...

75mm galvanised timber baton screws are used for fixing timber to timber including both softwoods and hardwoods. Timber batten screws have a hexagonal slot at the top where a special hexagonal drill fitting fits into to drive the screws into the timber. They have a cou...

75mm Galvanised Screws are a self drilling timber screw designed for fixing materials to softwood timber. If used on hardwood timber they may need to be pre drilled to prevent cracking and the screw breaking off. Galvanised fittings are for use outdoors....

75mm Stainless Steel Timber Baton screws are used for fixing timber to timber including both softwoods and hardwoods. These screws are a higher quality than the galvanised screws and are a better product in a marine environment. Stainless steel timber batten screws have...

Ball bearing 300mm galvanised strap gate hinges are mainly screwed to timber gates but can also be welded onto metal gate frames and posts. The hinges come in a pack of two hinges with two parts to each hinge so the gate can be removed from the post if necessary and tim...

Ball Bearing Galvanised Double Butt Hinges are mainly screwed to timber gates but can also be welded onto metal gate frames and posts. The hinges come in a pack of two hinges with two parts to each hinge so the gate can be removed from the post if necessary and timber s...

Cup Head Bolts are a an easy to use timber fastener. They have a square section underneath the cup which bites into the timber when hammered through the pre drilled clearance hole and prevents the bolt from turning when tightening the nut and washer on the other end. Of...

Hex Head galvanised bolts are used for both softwood and hardwood timber projects. In Landscape projects they are used for timber retaining wall construction, securing steps and bolting together fences, pergolas and decks. The Bolt heads sit flat on the surface or can b...